Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.12711270
- Product Categories
- Friendly Links
Information Name: | Stamping elbow, punching elbow GB, Hebei billion of pipeline |
Published: | 2014-08-31 |
Validity: | 0 |
Specifications: | Any |
Quantity: | |
Price Description: | |
Detailed Product Description: | Stamping elbow is made from malleable cast iron, used in water pipes, steam pipes, gas pipelines, oil pipelines convergence. Stamping elbow color is black, stamping elbow bend at right angles to the production company, excellent quality, wear-resistant stamping elbow GB, difficult to damage. Specifications for a stamping elbow / 2-10 inch, products widely used in petroleum, chemical, metallurgy, electric power and other industries pipe installation, installation, support and other help. Stamping elbow can only do small caliber, if the pipe size is too large, it is difficult to buy scrap stamping elbow, only the use of welding elbow. Due to the welding seam elbow more, all using performance than stamping stamping elbow elbow, easy to be corroded drain. And because the bulk of consumption is stamping elbow, so the price is cheaper than the welding elbow. Today, there are casting elbow, can do 316L, and better corrosion resistance when the stamping elbow connected with the tube, to pay attention to slag welding. Slag means is that in the non-metallic slag material. The main reason for this phenomenon has emerged that is either a tube or a stamping products above elbow beveling incorrect stamping elbow 90 degrees is the angle is too small, which is one reason, and one reason welding current is too small, slag viscosity too that some of the problems. Since the viscosity is too big, so the resulting slag floats less than the surface, causing the phenomenon of slag. Then there is the rate of energy when gas welding torch flame is not enough to clean up the work piece is not good at stamping elbow and pipe welding when using oxidizing flame, or that is in the swing amplitude is too small there is no time to slag pull out, etc., are all caused by the welding slag. After drug leather upper electrode block off, and have not been fully melted. How multi-channel welds children, is one of the reasons. After welding slag if there is a phenomenon, it will reproduce the welding is completed, the pressure test or is being used in the process will leak or leak phenomenon, so that we must bend in the welding stamping prevent such phenomenon. Stamping elbow, punching elbow GB, Hebei million gold piping supplied by Hebei million gold piping. This information consists of: providing Hebei million gold Pipe Manufacturing Co., Ltd. (www.yijinguanjian.com), we are business alliance member, the integrity of the whole network certification vendor. Feel free to contact us, contact: Alan Li Tong |
Admin>>>
You are the 22025 visitor
Copyright © GuangDong ICP No. 10089450, Pipe Manufacturing Co., Ltd. Hebei billion gold All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 22025 visitor
Copyright © GuangDong ICP No. 10089450, Pipe Manufacturing Co., Ltd. Hebei billion gold All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility